Hantek DSO5102P USB ออสซิลโลสโคปจัดเก็บข้อมูลดิจิตอล 2 ช่อง 100MHz 1GSa/s
การชำระเงินที่ปลอดภัยรับประกัน

ของขวัญฟรี
ยินดีต้อนรับสู่ Roymall, เว็บไซต์มืออาชีพของคุณสำหรับการซื้อของขวัญห้างสรรพสินค้าคุณภาพสูง เราขอขอบคุณและชื่นชมการสนับสนุนของคุณ และเราต้องการแสดงความขอบคุณด้วยการเพิ่มความตื่นเต้นพิเศษให้กับการซื้อของคุณ เมื่อคุณช้อปปิ้งกับเรา คุณไม่เพียงแต่จะได้เพลิดเพลินกับผลิตภัณฑ์คุณภาพสูงที่ช่วยยกระดับชีวิตของคุณ แต่คุณยังจะได้รับของขวัญฟรีพิเศษกับทุกคำสั่งซื้อของคุณ พร้อมที่จะสำรวจคอลเลกชันของเราและค้นหาของขวัญที่สมบูรณ์แบบของคุณหรือยัง? เรียกดูการเลือกสินค้าห้างสรรพสินค้าคุณภาพสูงของเรา สั่งซื้อ และรอคอยความตื่นเต้นของของขวัญฟรีที่จะมาพร้อมกับการซื้อของคุณนโยบายการจัดส่ง
เราจะทำงานอย่างหนักเพื่อจัดส่งสินค้าให้คุณหลังจากได้รับคำสั่งซื้อของคุณและทำให้แน่ใจว่าสินค้าถึงอย่างปลอดภัย รายละเอียดการจัดส่งจะถูกระบุในอีเมลยืนยันของคุณในกรณีส่วนใหญ่ คำสั่งซื้อจะถูกประมวลผลภายใน 2 วัน ในสถานการณ์พิเศษ จะมีการล่าช้าดังนี้: เมื่อคุณทำการสั่งซื้อในวันเสาร์ อาทิตย์ หรือวันหยุดราชการ จะล่าช้า 2 วันโดยปกติ จะใช้เวลา 5-7 วันทำการ (จันทร์ถึงศุกร์) โดยไม่ได้รับผลกระทบจากความล่าช้าของเที่ยวบินหรือปัจจัยแวดล้อมอื่นๆเนื่องจากบริการจัดส่งของเราเป็นระดับโลก เวลาจัดส่งจะขึ้นอยู่กับตำแหน่งของคุณ ดังนั้นอาจใช้เวลาสักครู่และโปรดอดทนรอหากคุณอยู่ในเขตหรือประเทศห่างไกล1. นโยบายการคืนสินค้าและการเปลี่ยนสินค้า
เรายอมรับเฉพาะสินค้าที่ซื้อจาก roymall.com หากคุณซื้อจากผู้จัดจำหน่ายในพื้นที่หรือร้านค้าปลีกอื่น คุณไม่สามารถคืนสินค้าให้เราได้ สินค้าขายสุดท้ายหรือของขวัญฟรีไม่สามารถคืนได้เพื่อให้มีสิทธิ์คืนสินค้า สินค้าของคุณต้องไม่ถูกใช้และอยู่ในสภาพเดียวกับที่คุณได้รับ นอกจากนี้ยังต้องอยู่ในบรรจุภัณฑ์เดิมหลังจากได้รับคำแนะนำการคืนสินค้าจากเรา โปรดบรรจุสินค้าที่จะคืนและส่งพัสดุของคุณที่ไปรษณีย์ท้องถิ่นหรือผู้ให้บริการอื่นเราจะประมวลผลสินค้าคืนหรือเปลี่ยนสินค้าของคุณภายใน 3-5 วันทำการหลังจากที่เราได้รับสินค้า การคืนเงินจะถูกประมวลผลและเครดิตอัตโนมัติไปยังวิธีการชำระเงินเดิมของคุณไม่สามารถคืนหรือเปลี่ยนสินค้าที่ผลิตตามสั่ง รวมถึงขนาดที่กำหนดเอง สีที่กำหนดเอง หรือการพิมพ์ที่กำหนดเองต้องการความช่วยเหลือเพิ่มเติม โปรดติดต่อเรา service@roymall.com หรือ Whatsapp: +8619359849471
2. นโยบายการคืนเงิน
คุณจะได้รับเงินคืนเต็มจำนวนหรือเครดิตร้านค้า 100% หลังจากที่เราได้รับและตรวจสอบพัสดุที่คืน การคืนเงินจะถูกประมวลผลและเครดิตอัตโนมัติไปยังวิธีการชำระเงินเดิมของคุณโปรดทราบว่าค่าจัดส่งและค่าธรรมเนียมหรือภาษีใดๆ ไม่สามารถคืนได้ ค่าจัดส่งเพิ่มเติมไม่สามารถคืนได้หลังจากที่พัสดุถูกส่งออก คุณมีหน้าที่รับผิดชอบในการชำระค่าธรรมเนียมเหล่านี้และเราไม่สามารถยกเว้นหรือคืนเงินได้ แม้ว่าคำสั่งซื้อจะถูกคืนให้เราหลังจากที่เราได้รับและยืนยันสินค้าที่คืนแล้ว เราจะส่งอีเมลถึงคุณเพื่อแจ้งให้ทราบว่าเราได้รับสินค้าที่คืนแล้ว เรายังจะแจ้งให้คุณทราบเกี่ยวกับการอนุมัติหรือปฏิเสธการคืนเงินของคุณหากคุณมีปัญหาใดๆ เกี่ยวกับกระบวนการคืนเงิน โปรดติดต่อเรา service@roymall.com หรือ Whatsapp: +8619359849471Feature:
200/100/70MHz bandwidths
1GSa/s Real Time sample rate
Large (7.0-inch) color display, WVGA(800x480)
Record length up to 40K
Trigger mode: edge/pulse width/line selectable video/slop/overtime etc.
USB host and device connectivity, standard
Multiple automatic measurements
Four math functions, including FFTs standard
Provides software for PC real-time analysis
Model
DSO5102P
Acquisition
Sample Rate
Real-Time Sample: 1GS/s
Acquisition Modes
Normal
Normal data only
Peak Detect
High-frequency and randon glith capture
Average
Wavefom Average, selectable 4,8,16,32,64,128
Inputs
Inputs Coupling
AC, DC, GND
Inputs Impendance
1Mu03a9± 2%u201620pF± 3pF
Probe Attenuation
1X, 10X
Supported Probe Attenuation Factor
1X, 10X, 100X, 1000X
Maximum Input Voltage
CAT I and CAT II: 300VRMS (10 x ), Installation Category;
CAT III: 150VRMS (1 x );
Installation Category II: derate at 20dB/decade above 100kHz to 13V peak AC at 3MHz* and above. For non-sinusoidal waveforms, peak value must be less than 450V. Excursion above 300V should be of less than 100ms duration. RMS signal level including all DC components removed through AC coupling must be limited to 300V. If these values are exceeded, damage to the oscilloscope may occur.Horizontal System
Sample Rate Range
500MS/s--1GS/s
Waveform Interpolation
(sin x)/x
Record Length
40K
SEC/DIV Range
4ns/div to 40s/div
Sample Rate and
Delay Time Accuracy± 50ppm(at over any ≥1ms time interval)
Position Range
20ns/div to 80us/div; (-8div x s/div) to 40ms;
200us/div to 40s/div; (-8div x s/div) to 400sTime Measurement Accuracy
(Full Bandwidth)Single-shot, Normal mode:± (1 sample interval +100ppm x reading + 0.6ns);
>16 averages:± (1 sample interval + 100ppm x reading + 0.4ns);
Sample interval = s/div u00f7 200Vertical System
Vertical Resolution
8-bit resolution, all channel sampled simultaneously
Position Range
2mV/div to 10V/div
Bandwidth
100MHz
Rise Time at BNC( typical)
3.5ns
Analog Bandwidth in Normal and Average modes at BNC or with probe, DC Coupled
2mV/div to 20mV/div, ± 400mV; 50mV/div to 200mV/div, ± 2V
500mV/div to 2V/div, ± 40V; 5V/div, ± 50VMath
+, -, *, /, FFT
FFT
Windows: Hanning, Flatop, Rectamgular, Bartlett, Blackman;
1024 sample pointBandwidth Limit
20MHz
Low Frequency Response (-3db)
≤ 10Hz at BNC
DC Gain Accuracy
± 3% for Normal or Average acquisition mode, 5V/div to 10mV/div;
± 4% for Normal or Average acquisition mode, 5mV/div to 2mV/divDC Measurement Accuracy,
Average Acquisition ModeWhen vertical displacement is zero, and N ≥16:± (3% x reading + 0.1div + 1mV) only 10mV/div or greater is selected;
When vertical displacement is not zero, and N≥16: ± [3% x (reading + vertical position) + 1% of vertical position + 0.2div]; Add 2mV for settings from 2mV/div to 200mV/div; add 50mV for settings from 200mV/div to 5V/divVolts Measurement Repeatability,
Average Acquisition Modevolts between any two averages of ≥16 waveforms acquired under same setup and ambient conditions
Trigger System
Trigger Types
Edge, Video, Pulse, Slope, Over time, Alternative
Trigger Source
CH1, CH2, EXT, EXT/5, AC Line
Trigger Modes
Auto, Normal, Single
Coupling Type
DC, AC, Noise Reject, HF Reject, LF Reject
Trigger Sensitivity
(Edge Trigger Type)DC(CH1,CH2):
1div from DC to 10MHz; 1.5div from 10MHz to 100MHz; 2div from 100MHz to Full;
DC(EXT):
200mV from DC to 100MHz; 350mV from 100MHz to 200MHz;
DC(EXT/5):
1V from DC to 100MHz;1.75V from 100MHz to 200MHz;
AC: Attenuates signals below 10Hz;
HF Reject: Attenuates signals above 80kHz
LF Reject: Same as the DC-coupled limits for frequencies above 150kHz; attenuates signals below 150kHzTrigger Level Range
CH1/CH2: ± 8 divisions from center of screen;
EXT: ± 1.2V;
EXT/5:± 6VTrigger Level Accuracy( typical)Accuracy is for signals having rise and fall times ≥20ns
CH1/CH2: 0.2div x volts/div within ± 4 divisions from center of screen;
EXT: ± (6% of setting + 40mV);
EXT/5: ± (6% of setting + 200mV);Set Level to 50%(typical)
Operates with input signals ≥50Hz
Video Trigger
Video Trigger Type
CH1, CH2: Peak-to-peak amplitude of 2 divisions;
EXT: 400mV;
EXT/5: 2VSignal Formats and Field Rates, Video Trigger Type
Supports NTSC, PAL and SECAM broadcast systems for any field or any line
Holdoff Range
100ns ~ 10s
Pulse Width Trigger
Pulse Width Trigger Mode
Trigger when (< , >, = , or u2260); Positive pulse or Negative pulse
Pulse Width Trigger Point
Equal: The oscilloscope triggers when the trailing edge of the pulse crosses the trigger level.
Not Equal: If the pulse is narrower than the specified width, the trigger point is the trailing edge. Otherwise, the oscilloscope triggers when a pulse continues longer than the time specified as the Pulse Width.
Less than: The trigger point is the trailing edge.
Greater than (also called overtime trigger): The oscilloscope triggers when a pulse continues longer than the time specified as the Pulse WidthPulse Width Range
20ns ~ 10s
Slope Trigger
Slope Trigger Mode
Trigger when (< , > , = , or u2260 ); Positive slope or Negative slope
Slope Trigger Point
Equal: The oscilloscope triggers when the waveform slope is equal to the set slope.
Not Equal: The oscilloscope triggers when the waveform slope is not equal to the set slope.
Less than: The oscilloscope triggers when the waveform slope is less than the set slope.
Greater than: The oscilloscope triggers when the waveform slope is greater than the set slope.Time Range
20ns ~ 10s
Overtime Trigger
Over Time Mode
Rising edge or Falling edge
Time Range
20ns ~ 10s
Alternative Trigger
Trigger on CH1
Internal Trigger: Edge, Pulse Width, Video, Slope
Trigger on CH2
Products related to this itemLoading related products...❮❯Videos for similar productLoading product videos...❮❯Tools, Industrial & Scientific Ranking